Ferrite sleeves are very similar in shape to toroids. Sleeves generally have thin walls and close
mechanical tolerances. They can be placed over the windings of an open magnetic structure component to
shield nearby components from stray magnetic flux. Sleeves have an added benefit, in some cases a
sleeve slipped over a bobbin can significantly raise the inductance.
|
| Part Number | Units | Length | Tolerance | Outside Diameter | Tolerance | Inside Diameter | Tolerance | |||||||
| in. mm |
0.200 5.080 |
0.007 0.178 |
0.088 2.235 |
0.002 0.051 |
0.067 1.702 |
0.003 0.076 |
||||||||
| in. mm |
0.217 5.512 |
0.010 0.254 |
0.098 2.489 |
0.002 0.051 |
0.074 1.880 |
0.003 0.076 |
||||||||
| in. mm |
0.250 6.350 |
0.010 0.254 |
0.098 2.489 |
0.002 0.051 |
0.074 1.880 |
0.003 0.076 |
||||||||
| in. mm |
0.287 7.290 |
0.008 0.203 |
0.118 2.997 |
0.001 0.025 |
0.092 2.337 |
0.002 0.051 |
||||||||
| in. mm |
0.330 8.382 |
0.010 0.254 |
0.149 3.785 |
0.002 0.051 |
0.098 2.489 |
0.003 0.076 |
||||||||
| in. mm |
0.355 9.017 |
0.007 0.178 |
0.149 3.785 |
0.001 0.025 |
0.110 2.794 |
0.002 0.051 |
||||||||
| in. mm |
0.368 9.347 |
0.007 0.178 |
0.149 3.785 |
0.001 0.025 |
0.118 2.997 |
0.002 0.051 |
||||||||
| in. mm |
0.368 9.347 |
0.007 0.178 |
0.152 3.861 |
0.001 0.025 |
0.118 2.997 |
0.002 0.051 |
||||||||
| in. mm |
0.485 12.319 |
0.015 0.381 |
0.255 6.477 |
0.005 0.127 |
0.204 5.182 |
0.004 0.102 |
||||||||
| in. mm |
0.500 12.700 |
0.015 0.381 |
0.255 6.477 |
0.005 0.127 |
0.210 5.334 |
0.003 0.076 |
 |
|||
|
Company Profile
What is a Ferrite?
Manufacturing Process Products Available Stock Quality Assurance Capabilities Ordering What's New Career Opportunities Contact Us Home |
|||
|
|||
|
MMG-North America 126 Pennsylvania Ave • Paterson, NJ 07503 • United States Tel: (973) 345-8900 • Fax: (973) 345-1172 Mail us: sales@mmgna.com |
|||